The Xiaomi 4 Ultra front fork reflectors replace the amber inserts in the trim beside the front wheel. Both plastic reflectors have rounded ends and adhesive backing. Each one measures 115 × 20 mm. Use the two-piece set when the reflective surfaces have split, lifted out of their recesses or gone missing.
Where the Xiaomi 4 Ultra front fork reflectors fit
Identify the recessed area on each side cover of the front fork. Compare the width and the rounded ends of the remaining reflector with those of the replacement. This position check helps distinguish the front inserts from the reflectors located beside the rear wheel.
The textured face returns light when the scooter is illuminated from the side. The set supplies both reflector inserts. If the trim has cracked across the recess or an edge has changed shape, inspect the cover before fitting a new reflector. A clean and intact recess gives the adhesive a continuous surface to grip.
Positioning the adhesive reflector strips
After removing the old strip, clear dirt and adhesive residue from the recess. Allow the surface to dry. Try the new strip in the recess with the backing film still on. Check the ends first, then see whether the entire strip lies flat at the same depth as the old insert.
Once the position is clear, peel away the protective layer and press along the strip so that it seats evenly. Repeat for the opposite cover. Look along the edge of both strips after fitting. An edge that lifts may indicate residue or damage in the recess that needs attention.














Reviews
There are no reviews yet.