The Xiaomi 4 Pro steering bearing kit fits the steering assembly on the first-generation electric scooter. The set contains six metal components, including bearings and rings. They sit around the point where the front fork turns in the frame. Use the kit when the worn bearings and their associated rings need replacing together.
Identifying the Xiaomi 4 Pro steering bearing kit
Lay the removed parts out in their original order and compare them with the six pieces shown in the main image. Locate the bearing element and flat support ring, then look for the shaped ring, the ring with tabs and the thin circular ring. The side profile and the edges make it easier to match similar-looking pieces.
Check the inner and outer diameters as well as the height of each corresponding part. Keep the old components facing the same way so you can compare which surface sat towards the fork and which faced the frame. Check that the scooter is the first-generation Xiaomi Electric Scooter 4 Pro before fitting.
Inspecting the steering seats before assembly
Check the surfaces that support the bearings and remove debris from the area before reassembly. If you plan to replace one worn part, look at the nearby rings and seating surfaces to determine whether the rest of the kit is needed.
Follow the steering assembly’s correct component order and orientation. Before use, turn the handlebar both ways and check for smooth movement. Check around the point where the fork meets the frame for any play.



















Reviews
There are no reviews yet.