The Xiaomi 4 Pro front fork connects the front wheel to the steering assembly on the first-generation electric scooter. The slots at the bottom locate the front wheel axle and the upper tube fits into the steering assembly. The pack contains a single metal fork. Wheel and plastic trim parts are available separately.
Comparing the Xiaomi 4 Pro front fork
Check the generation on the scooter label and compare the lower fork legs with your original fork. Look at the openings that locate the axle and compare their direction from the side. Check the spacing between the legs as well, particularly if you still have the wheel fitted to the original fork.
If you plan to reuse the plastic fork trim, compare the points where the covers attach on each leg. Check the parts against the dimension drawing by measuring from the same points on the original component. The illustration helps you compare the axle area and the end of the upper tube separately.
What to check around the steering assembly
Inspect the upper end of the original fork and note its shape and where it meets the steering bearings. After an impact, also check the wheel, axle hardware and bearing seats to see which components need attention before assembly.
Before use, confirm that the front wheel rotates freely with the trim in place and that there is no play where the fork turns in the frame. If the axle slots or upper tube differ from your original component, recheck the model and generation before fitting.



















Reviews
There are no reviews yet.