The Xiaomi 4 Pro dashboard cover is the rigid black plastic top piece for the instrument panel on the first-generation scooter. It comes with a shaped double-sided adhesive pad. The cover is useful when a scratch obscures the readings, a crack has reached the rim, or the original adhesive has come loose.
When to choose the Xiaomi 4 Pro dashboard cover
Turn on the scooter and see whether the display is working and the power button responds. If the issue is confined to the outer panel, the cover and adhesive can be replaced while you continue using the display beneath them. Flickering readings or a button that fails to respond are reasons to inspect the instrument panel itself before ordering.
Use the outline of the original panel to check compatibility. Compare where the cover curves at each end and where the power button is marked. Confirm the generation on the scooter label. The cover has to follow the rim of the existing dashboard, so its profile is an important part of the fit.
Checking alignment before applying the pad
Remove the old cover and adhesive fragments from the seating surface. Test the position of the replacement before peeling the protective film off the adhesive. Look for flat contact at both ends and make sure the button marking lines up with the control underneath.
Apply the pad to a dry, clean surface and press along the edges of the panel as it seats. Switch the scooter on again and check that you can see the readings and operate the button normally. If the cover lifts on one side, look for remaining adhesive or a plastic fragment trapped under the edge.
















Reviews
There are no reviews yet.